Skill Test : EIGRP Configuration

EIGRP

Configuration Command Line: 

Router(config)#hostname R1
R1(config)#
R1(config)#int g0/0
R1(config-if)#ip address 172.16.1.1 255.255.255.0
R1(config-if)#no shut

R1(config-if)#exit
R1(config)#int s0/3/0
R1(config-if)#ip address 172.16.3.1 255.255.255.252
R1(config-if)#clock rate 64000
R1(config-if)#no shut

%LINK-5-CHANGED: Interface Serial0/3/0, changed state to down
R1(config-if)#
R1(config-if)#
R1(config)#int s0/3/1
R1(config-if)#ip address 192.168.10.6 255.255.255.252
R1(config-if)#no shut

%LINK-5-CHANGED: Interface Serial0/3/1, changed state to down
R1(config-if)#
Router>en
Router#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname R2
R2(config)#

R2(config)#int g0/0
R2(config-if)#ip address 172.16.2.1 255.255.255.0
R2(config-if)#no shut

R2(config-if)#
%LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up

R2(config-if)#

R2(config-if)#exit
R2(config)#int s0/3/0
R2(config-if)#ip address 172.16.3.2 255.255.255.252
R2(config-if)#no shut

R2(config-if)#
%LINK-5-CHANGED: Interface Serial0/3/0, changed state to up

R2(config-if)#

R2(config)#int s0/3/1
R2(config-if)#ip address 192.168.10.9 255.255.255.252
R2(config-if)#clock rate 64000
R2(config-if)#no shut

%LINK-5-CHANGED: Interface Serial0/3/1, changed state to down
R2(config-if)#exit
R2(config)#

Router>en
Router#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname R3
R3(config)#

R3(config)#int g0/0
R3(config-if)#ip address 192.168.1.1 255.255.255.0
R3(config-if)#no shut

R3(config-if)#
%LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up

R3(config-if)#

R3(config)#int s0/3/1
R3(config-if)#ip address 192.168.10.10 255.255.255.252
R3(config-if)#no shut

R3(config-if)#
%LINK-5-CHANGED: Interface Serial0/3/1, changed state to up

R3(config-if)#exit
R3(config)#

R3(config)#int s0/3/0
R3(config-if)#ip address 192.168.10.5 255.255.255.252
R3(config-if)#clock rate 64000
R3(config-if)#no shut

R3(config-if)#
%LINK-5-CHANGED: Interface Serial0/3/0, changed state to up

R3(config-if)#

EIGRP Command Line: 

R1(config)#router eigrp 10
R1(config-router)#network 172.16.1.0 0.0.0.255
R1(config-router)#network 192.16.3.0 0.0.0.3
R1(config-router)#network 192.168.10.4 0.0.0.3
R1(config-router)#
R2(config)#router eigrp 10
R2(config-router)#network 172.16.2.0 0.0.0.255
R2(config-router)#network 172.16.3.0 0.0.0.3
R2(config-router)#network 172.168.10.8 0.0.0.3
R2(config-router)#
R3(config)#router eigrp 10
R3(config-router)#network 192.168.10.8 0.0.0.3
R3(config-router)#network 192.168.10.4 0.0.0.3
R3(config-router)#
%DUAL-5-NBRCHANGE: IP-EIGRP 10: Neighbor 192.168.10.6 (Serial0/3/0) is up: new adjacency

R3(config-router)#network 192.168.1.0 0.0.0.255
R3(config-router)#

Thank you

Momataj Momo

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s